Office Address
Sr. No. 186, Plot No.398, Kirkatwadi - Nandoshi Road, Nandoshi, Tal.Haveli, Pune - 411024, Maharashtra, India.
Phone Number
+91 - 97641 13247
+91 - 97641 13247
Email Address
response@aimtechindia.com
sales@aimtechindia.com
Sr. No. 186, Plot No.398, Kirkatwadi - Nandoshi Road, Nandoshi, Tal.Haveli, Pune - 411024, Maharashtra, India.
+91 - 97641 13247
+91 - 97641 13247
response@aimtechindia.com
sales@aimtechindia.com
| NOM SIZE D |
PITCH P |
FLAT TO FLAT S |
e MIN | MINOR DIA OF NUT (6H) | HEIGHT OF HEX NUT, m | |||
|---|---|---|---|---|---|---|---|---|
| MIN | MAX | MIN | MAX | MIN | MAX | |||
| M6 | 1.00 | 9.78 | 10.00 | 11.05 | 4.917 | 5.153 | 4.70 | 5.00 |
| M8 | 1.25 | 12.73 | 13.00 | 14.38 | 6.647 | 6.912 | 6.14 | 6.50 |
| M10 | 1.50 | 16.73 | 17.00 | 18.90 | 8.376 | 8.676 | 7.64 | 8.00 |
| M12 | 1.75 | 18.67 | 19.00 | 21.10 | 10.106 | 10.441 | 9.64 | 10.00 |
| M14 | 2.00 | 21.67 | 22.00 | 24.49 | 11.835 | 12.210 | 10.57 | 11.00 |
| M16 | 2.00 | 23.67 | 24.00 | 26.75 | 13.835 | 14.210 | 12.57 | 13.00 |
| M18 | 2.50 | 26.67 | 27.00 | 30.14 | 15.294 | 15.744 | 14.57 | 15.00 |
| M20 | 2.50 | 29.67 | 30.00 | 33.53 | 17.294 | 17.744 | 15.57 | 16.00 |
| M22 | 2.50 | 31.61 | 32.00 | 35.72 | 19.274 | 19.744 | 17.57 | 18.00 |
| M24 | 3.00 | 35.38 | 36.00 | 39.98 | 20.752 | 21.252 | 18.48 | 19.00 |
| M27 | 3.00 | 40.38 | 41.00 | 45.63 | 23.752 | 24.252 | 21.48 | 22.00 |
| M30 | 3.50 | 45.38 | 46.00 | 51.28 | 26.211 | 26.771 | 23.48 | 24.00 |
| M33 | 3.50 | 49.38 | 50.00 | 55.80 | 29.211 | 29.771 | 25.48 | 26.00 |
| M36 | 4.00 | 54.26 | 55.00 | 61.31 | 31.670 | 32.270 | 28.48 | 29.00 |
| M39 | 4.00 | 59.26 | 60.00 | 66.96 | 34.670 | 35.270 | 30.38 | 32.00 |
Disclaimer - Dimensional data and technical information for IS 1364 Part 3 was obtained from publicly available sources and not acquired through standards agencies. It has been completed and compiled for reference purposes only; where discrepancies are found they are subject to change without notice. Aim Tech makes no warranties or representations regarding the accuracy and validity of the compiled information and data. Contact the relevant standards authorities for accurate and detailed information.